EVlink-MEM-0807

– Automatic billing

- National charging for electric and plug-in vehicles.

- Customer and user management.

- Management, real-time remote monitoring and providing technical solutions for all types of loads (domestic and public).

- Charging and power consumption reports.

- User-friendly and intended for all types of users: private customers, house committees, businesses, organizations and municipalities.

- Interfacing with the management software for the control and control of Street Light street lighting, through which you can receive targeted power consumption reports, fault alerts, energy monitoring, 24/7 monitoring of the activity of the EV chargers.

Carrying out the loading

The system allows local or remote connection using the open communication protocol OCPP version 1.6.

This means of communication allows the charging station to be connected to a control center for the purposes of control, control and financial billing as required.

An RFID reader unit is installed in the system that allows authorization to carry out the charging using a smart card.

The use of the RFID card is available and effective both in public and private charging stations. This card ensures that only authorized persons can carry out the charge.

Charging can be free or paid under management and control software according to the customer's requirement and pre-determined conditions, there is an option to install a credit card billing system.

The possibility of receiving permission from a control center, through the dedicated communication and billing accordingly, as required.

As a safety measure, actual charging is only possible after connecting the plug to the socket and receiving the authorization as detailed above.

electrical characteristics

Power up to 22KW (3*32A).

7-pin structure.

4 pins for the feed – L1 L2 L3 N.

1 ground pin.

PP pin to indicate a proper connection between the socket and the plug.

The CP pin is used to communicate with the charger installed in the electric vehicle for the purpose of controlling the charging current.

Characteristics of the socket of the charger for the electric vehicle - TYPE-2

* A socket is installed in the charger in accordance with the requirements of the IEC 62196 standard.

* Mennekes Type 2 sockets are widely used in Israel and Europe.

* This outlet allows charging with three-phase or single-phase AC voltage 230V 50Hz